Metallurgical Phase
Solid-state chemical phases forming at interface boundaries between dissimilar metals exhibit distinct crystal structures and fixed stoichiometry. In sensor packaging and wire bonding, intermetallic compounds dictate thermal endurance and mechanical joint integrity. Their formation ceases when solid solution saturation limits prevent further atomic diffusion across interface boundaries.
Thermal Activation
Thermal activation during storage accelerates growth of interfacial alloy layers. Gold-aluminum wire bond interfaces produce intermetallic compounds such as Au4Al and Au5Al2 when stored at elevated temperatures. High electrical resistance at these phase interfaces impairs weak transducer signal transmission.
Kirkendall void formation accompanies uneven atomic diffusion rates across the phase boundary, weakening physical adhesion between bond wire and pad metallization.
Mechanical Embrittlement
Brittle crystalline structures cause microcracking under cyclic mechanical shock. Intermetallic compounds formed between tin solder alloys and copper sensor substrates exhibit high hardness but low fracture toughness. Vibrational stress induces crack propagation along the brittle intermetallic interface, resulting in sudden contact open circuits.
High-reliability sensor manufacturing mandates microalloy additions like nickel or bismuth to slow intermetallic phase growth during operational heating cycles.
Reliability Boundary
Qualification standards dictate microsectioning analysis to measure growth rates. Thermal storage testing validates that intermetallic compounds do not exceed three micrometers in thickness after one thousand hours at maximum rated temperature.