Communication Bus
Synchronous serial data links provide high-speed connections between a micro-controller and peripheral devices. The spi interface utilizes four dedicated lines to manage the transfer of information in a full-duplex mode. This configuration includes a clock signal, a master output line, a master input line and a slave select line.
Timing Requirement
Clock signals synchronize the bits of data as they move between the devices. Within an spi interface, the master determines the frequency and the phase of the clock to match the capabilities of the slave. Data is typically sampled on one edge of the clock and shifted on the opposite edge to ensure stability.
Setup and hold times are verified with a logic analyzer to prevent data corruption during fast transfers. The maximum achievable speed depends on the propagation delay of the signals through the circuit board.
Bus Architecture
Multiple peripherals can share the same data lines if each device has a unique selection signal. The spi interface allows for high throughput because it lacks the overhead of addressing and acknowledgement bits found in other protocols. Signal integrity is maintained by keeping the trace lengths short to minimize capacitive loading.
Hardware Integration
Logic levels and drive strengths must be compatible across all connected components. When designing with an spi interface, level shifters are required if the master and slave operate at different voltages. Termination resistors are placed on the lines to prevent signal reflections in high-frequency applications.