Transmission Quality
Fidelity of an electrical signal as it travels from a transmitter to a receiver is a measure of the system’s ability to maintain correct voltage and timing margins. High signal integrity ensures that the transmitted binary data is decoded correctly without errors caused by pulse distortion, noise or timing jitter. By monitoring this metric, developers evaluate the overall health of high-speed communication channels and identify potential layout defects.
It is a core parameter in the design of modern high-speed circuit boards and backplanes.
Degradation Factor
Reflection of electromagnetic waves occurs whenever a trace encounters an impedance mismatch, which can be caused by vias, connectors or changes in trace width. In high-speed systems, poor signal integrity is often the result of these reflections, which manifest as overshoot, undershoot and ringing on the signal waveform. This behavior can cause the receiver to detect false clock edges or misinterpret the data state.
Crosstalk from adjacent parallel traces further degrades the waveform, adding random voltage fluctuations that narrow the sampling eye diagram.
Measurement Technique
Validation of high-frequency traces requires the use of specialized oscilloscopes and time-domain reflectometers to analyze the physical waveform. Designers use an eye diagram to evaluate signal integrity, which overlays multiple waveform cycles to show the voltage and timing margins of the signal. A wide and open eye indicates a clean transmission path with low noise and jitter, while a closed eye indicates severe degradation that could lead to data loss.
This measurement is typically performed at the receiver pin to capture the cumulative effects of the entire transmission path.
Design Solution
Controlled impedance routing, which maintains a constant trace geometry and dielectric spacing, is the primary method for preventing reflection problems on high-speed boards.