Extracting Desorption Activation Energy via Multirate Kissinger Plotting Methods
Extract desorption activation energy using multirate Kissinger plots to establish accurate package bake profiles and micro-cavity vacuum lifespan predictions.

Peak
Thermal desorption spectroscopy tracks gas evolution from solid substrates during controlled temperature ramps. As an adhesive, gel fill, micro-cavity wall, or sensor package substrate undergoes linear heating at rate beta, volatile adsorbates acquire enough kinetic energy to overcome binding potentials. Desorption accelerates to a peak before surface concentration depletes, producing a distinct maximum in the mass spectrometer or thermogravimetric trace.
Raising the heating rate shifts this peak to higher absolute temperatures, since molecular escape kinetics require a specific thermal impulse over time.
Determining the activation energy for desorption requires peak emission temperatures across at least four separate heating rates. A slow ramp, such as 1.0 K/min, gives volatile species time to desorb at lower thermal thresholds over longer durations. Rapid heating, such as 20.0 K/min, compresses desorption into a tight time window, shifting the peak upward by tens of Kelvin.
This temperature offset forms the physical basis for extracting kinetic parameters without knowing absolute surface coverage.
| Material Application | Desorbing Species | Ramp Rate Beta (K/min) | Temperature Tp (K) | Activation Energy Ed (kJ/mol) | Reaction Order n |
|---|---|---|---|---|---|
| Epoxy Die Attach | Water (H2O) | 1.0 / 5.0 / 10.0 / 20.0 | 382.1 / 401.5 / 412.3 / 424.8 | 48.2 +/- 1.5 | 1.0 |
| Fluorosilicone Gel | Isopropanol | 2.0 / 5.0 / 12.0 / 25.0 | 345.0 / 358.2 / 371.4 / 384.6 | 62.7 +/- 2.1 | 1.0 |
| Ceramic LGA Cavity | Hydrogen (H2) | 5.0 / 10.0 / 20.0 / 40.0 | 520.4 / 541.1 / 563.8 / 588.2 | 112.4 +/- 3.8 | 2.0 |
| Getter Material | Carbon Monoxide | 2.0 / 10.0 / 20.0 / 50.0 | 615.2 / 648.0 / 665.1 / 687.4 | 154.1 +/- 4.2 | 1.0 |
Package thermal mass introduces systematic lag between heater block sensors and internal die surfaces. A 3.5 mm ceramic land grid array package, for instance, shows far greater thermal lag than an unencapsulated silicon die. Placing the thermocouple directly at the active outgassing zone prevents false activation energy shifts from external thermal gradients.
Selecting heating rates across two orders of magnitude helps separate surface desorption mechanisms from bulk substrate diffusion.
Heating rates above 15 K/min create a temperature offset of up to 4.2 K between the package thermal sensor and the active desorption surface in a 3.5 mm ceramic LGA housing.
Surface heterogeneity alters how thermal desorption peaks develop across heating rates. Homogeneous surfaces yield symmetrical peaks during first-order desorption. Heterogeneous surfaces, with their range of binding site energies, broaden the desorption profile toward high-temperature tails.
Evaluating peak shapes across multiple heating rates indicates whether single-state Kissinger kinetic assumptions hold for the assembly or if multi-state models are necessary.
Distinguishing whether micro-cavity pressure rise stems from surface desorption or seal seam permeability remains a central question when evaluating sealed MEMS enclosures.

Equation
Non-isothermal kinetic modeling provides the theoretical framework for evaluating temperature-dependent rates. The Polanyi-Wigner equation describes surface desorption rates as a function of temperature, surface coverage, reaction order, and activation energy. Combining Arrhenius temperature dependence with a constant heating rate yields a non-linear differential equation for the rate of surface species depletion.
Evaluating this expression at maximum desorption velocity isolates the activation energy parameter.
Homer Kissinger derived a simplification for non-isothermal transformation reactions that applies directly to thermal desorption spectroscopy. At the peak temperature Tp, the time derivative of the desorption rate equals zero. This boundary condition eliminates explicit surface coverage terms for first-order kinetics.
Taking the natural logarithm produces a linear relationship between heating rate beta, peak temperature Tp, universal gas constant R, and desorption activation energy Ed.
The standard multirate Kissinger relation for surface desorption follows the expression: ln(beta / Tp^2) = -Ed / (R Tp) + ln(A R / Ed), where A represents the pre-exponential kinetic frequency factor. Plotting inverse peak temperature 1/Tp on the horizontal axis against ln(beta / Tp^2) on the vertical axis yields a straight line with slope -Ed / R, permitting direct extraction of activation energy without integrating the desorption peak area.
- Record mass spectrometer target ion current or thermogravimetric mass loss rates across four or more linear heating schedules.
- Identify absolute peak emission temperatures Tp in Kelvin for each heating rate beta by applying a second-order polynomial filter around local maximum signals.
- Calculate reciprocal peak temperature 1/Tp for each run in units of inverse Kelvin.
- Compute the logarithmic rate parameter ln(beta / Tp^2) using heating rates converted to Kelvin per second.
- Perform an unweighted linear least-squares fit on the coordinate pairs of 1/Tp and ln(beta / Tp^2).
- Multiply the resulting slope by the negative value of the universal gas constant 8.31446 J/(mol K) to yield desorption activation energy in Joules per mole.
- Determine the pre-exponential frequency factor A from the plot intercept using the calculated activation energy.
Applying the Kissinger formulation to second-order processes introduces coverage dependence into the intercept term. Because second-order desorption rates vary with the square of surface coverage, peak temperature shifts with initial loading as well as heating rate. Standard Kissinger analysis assumes initial surface coverage is identical across all runs; verifying constant initial coverage prior to multirate sweeps prevents systematic skew in extracted parameters.
A regression coefficient dropping below three nines on a multirate plot signals non-first-order desorption kinetics or dynamic surface coverage effects.
First-order desorption processes maintain a constant peak temperature under variable surface loading at a fixed heating rate, whereas second-order processes shift toward lower peak temperatures as initial coverage increases. Evaluating peak position stability under isothermal holds prior to heating sweeps confirms the reaction order. Extracting activation energy from pure first-order systems provides higher confidence than fitting parameters to mixed-order outgassing reactions.
Linearity across the plotting axes confirms first-order desorption mechanics over the evaluated temperature range.

Drift
Experimental distortions alter measured peak positions during fast thermal sweeps. Heat transfer resistance through packaging substrates creates internal temperature lag, causing the temperature sensor to read lower than the actual desorption interface. High heating rates exaggerate this discrepancy, pushing recorded peak temperatures upward beyond kinetic expectations.
This systematic shift flattens the Kissinger plot slope, producing an artificially low activation energy.
Mass spectrometer sampling interfaces introduce transport delays into kinetic data collection. Volatile molecules desorbing inside a micro-cavity package must diffuse through extraction capillaries to reach the ionization chamber. At high heating rates, gas-phase diffusion times approach the duration of thermal peak transitions.
Signal broadening from instrument lag shifts recorded peak maxima, contaminating kinetic calculations.
| Package Configuration | Substrate Thermal Conductance (W/m K) | Heating Rate Beta (K/min) | True Surface Tp (K) | Measured Sensor Tp (K) | Calculated Ed Error (%) |
|---|---|---|---|---|---|
| Bare Silicon Die (0.3 mm) | 148.0 | 2.0 / 10.0 / 50.0 | 370.0 / 391.2 / 418.5 | 370.1 / 391.4 / 418.9 | -0.4 |
| Ceramic LGA (1.2 mm Alumina) | 24.0 | 2.0 / 10.0 / 50.0 | 370.0 / 391.2 / 418.5 | 370.8 / 393.5 / 426.1 | -8.7 |
| Plastic Molded QFN (0.9 mm) | 0.7 | 2.0 / 10.0 / 50.0 | 370.0 / 391.2 / 418.5 | 372.4 / 398.1 / 437.8 | -21.3 |
| Kovar Metal Header (TO-8) | 17.0 | 2.0 / 10.0 / 50.0 | 370.0 / 391.2 / 418.5 | 371.2 / 395.0 / 429.4 | -12.1 |
Coverage-dependent binding energy represents another mechanism that invalidates standard Kissinger extraction assumptions. Adsorbed species on metallic or oxide sensor surfaces exhibit repulsive intermolecular interactions at high coverage, lowering the energy barrier for desorption. As desorption proceeds during a thermal ramp, surface coverage drops, causing activation energy to rise dynamically throughout the test run.
- Thermal Lag Offset introduces non-linear shifts in peak temperature data by under-reporting surface temperatures at ramp rates exceeding 10 K/min.
- Readsorption Phenomena traps desorbed molecules back onto cold package walls during thermal sweeps, distorting high-temperature peak symmetry.
- Heterogeneous Surface Binding spreads desorption over wide temperature intervals, reducing linear correlation coefficients on Kissinger plots.
- Instrument Response Delay shifts detector ion intensity signals behind physical sample outgassing events during rapid heating cycles.
- Pumping Speed Restrictions build transient back-pressure inside test chambers, altering desorption kinetics from free molecular flow to viscous regimes.
Readsorption of desorbed volatile species back onto package surfaces distorts multirate desorption profiles. In confined test chambers or micro-cavity structures, gas molecules collide with surrounding surfaces before escaping to high vacuum. When the readsorption rate rivals vacuum pumping speed, peak maxima shift to higher temperatures.
Kissinger calculations applied to readsorption-limited data yield activation energies that reflect gas transport rather than true surface binding energy.
Qualification dossiers omitting temperature calibration records under JEDEC JESD22-A108 force incoming packaging lots into extended high-temperature bake holds.
Errors in temperature measurement propagate directly into exponential lifetime models. Underestimating desorption activation energy by 15 percent alters projected outgassing rates by more than an order of magnitude at operating temperatures. Relying on uncompensated temperature data leads to approving sub-standard packaging materials for vacuum-sealed sensors.
Failing to account for thermal mass lag during high-rate Kissinger sweeps leads to premature vacuum degradation in sealed sensor packages, causing field failures and unrecoverable warranty costs.

Cavity
Hermetic MEMS sensor enclosures require low internal pressures across multi-year operational lifetimes. Micro-bolometers, resonant pressure sensors, and MEMS gyroscopes degrade when internal gas pressure rises above specified limits. Organic adhesives, metallic plating residues, and glass frit seals desorb trapped moisture and volatile organic compounds into the sealed cavity over time.
Using activation energy parameters extracted via multirate Kissinger methods enables prediction of long-term cavity pressure under expected storage and operating temperature profiles.
Determining factory bake-out schedules depends on accurate activation energy extraction. Standard assembly procedures bake open package bases in vacuum ovens prior to final lid sealing. A packaging material with a moisture desorption activation energy of 45 kJ/mol desorbs rapidly at 125 degrees Celsius, whereas a material exhibiting an activation energy of 110 kJ/mol demands higher bake temperatures or longer durations to clear bound surface water.
- Measure Outgassing Kinetics using multirate Kissinger analysis to obtain activation energy and pre-exponential factors for all internal package materials.
- Calculate Thermal Acceleration Factors for factory bake processes using the Arrhenius rate law derived from extracted desorption parameters.
- Establish Temperature Ceilings to prevent thermal decomposition of organic die-attach adhesives during extended high-temperature vacuum bake-out.
- Size Internal Getter Capacity based on predicted total desorbed gas volume calculated over the twenty-year operational lifespan of the sensor.
- Verify Vacuum Seal Integrity by measuring post-seal cavity pressure under accelerated thermal aging based on activation energy profiles.
Internal package getters absorb desorbed gas to maintain micro-cavity vacuum levels. Getter activation kinetics parallel desorption kinetics, requiring precise thermal cycles to unpassivate metallic getter surfaces. Kinetic data extracted from thermal desorption sweeps identifies the minimum thermal budget necessary to activate internal getters without exceeding the thermal limits of delicate MEMS transducer structures.
Package lifetime calculations based on constant activation energy assumptions understate micro-cavity pressure rise when secondary desorption states unlock at elevated operational temperatures.
Gel fills in pressure sensor packages act as reservoirs for dissolved moisture and processing solvents. Solvent molecules diffuse through the gel matrix to the active sensor surface, altering piezoresistive element resistance and gel shear modulus. Kissinger kinetic analysis on gel outgassing isolates volatile fraction desorption states, providing quantitative criteria for gel curing and vacuum degassing before board mounting.
Standard four-hour 125 degrees Celsius bake profiles remove surface-bound volatiles, but high activation energy binding states desorb slowly over years at elevated operating temperatures.

Ledger
Sourcing sensor components for hermetic applications requires auditing supplier material qualification data. Vendors supply mass loss data derived from thermogravimetric analysis, but single-rate curves fail to separate overlapping desorption mechanisms. Demanding multirate Kissinger test data ensures quantification of specific activation energies for every desorbing volatile species.
Qualification dossiers containing verified kinetic parameters enable clear comparisons between competing package designs and substrate materials.
Package selection balances hermetic performance against unit production cost. Ceramic leadless chip carrier packages provide high hermeticity and low outgassing rates, but carry high component costs. Molded plastic QFN packages offer low unit costs, but introduce moisture desorption pathways through the organic mold compound.
Extracting desorption activation energies for moisture in molded compounds allows engineers to establish pre-reflow bake procedures, mitigating pop-corning risks during surface-mount assembly.
| Package Variant | Unit Cost (USD) | Outgassing Risk Profile | Bake-out Energy Demand | Kinetic Qualification Dossier Cost (USD) | Hermeticity Yield (%) |
|---|---|---|---|---|---|
| Custom Ceramic LGA (Metal Lid) | 14.50 +/- 1.20 | Low (Surface Only) | High (150 C Vacuum) | 8,500 | 99.2 |
| Standard TO-8 Header (Glass Seal) | 6.20 +/- 0.40 | Very Low (Inorganic) | Medium (125 C Vacuum) | 5,200 | 98.7 |
| Pre-Molded QFN (Cavity Style) | 2.10 +/- 0.15 | High (Polymer Matrix) | Moderate (105 C Air) | 12,000 | 91.5 |
| Wafer-Level Chip-Scale Vacuum Package | 18.80 +/- 2.50 | Extremely Low (Silicon-Glass) | Low (In-situ Plasma) | 22,000 | 96.8 |
Procurement agreements for automotive and aerospace sensor packages must stipulate outgassing compliance criteria. Incorporating desorption kinetic parameters into quality control specifications establishes clear acceptance thresholds for incoming substrate lots. Lots displaying altered activation energy profiles indicate raw material contamination, binder formulation changes, or uncontrolled cleaning chemistry at the manufacturing plant.
- Material suppliers shall provide multirate Kissinger plot analysis covering heating rates from 1.0 to 20.0 K/min for all organic package components.
- The extracted desorption activation energy for water desorbing from die-attach materials shall not fall below 55.0 kJ/mol.
- Calculated total outgassing volume after 100 hours at 85 degrees Celsius storage shall not exceed 0.01 standard cubic centimeters per cubic centimeter of cavity volume.
- Batch acceptance testing shall mandate thermogravimetric verification on one sample per reel, flagging peak temperature shifts exceeding 2.0 Kelvin from baseline qualification plots.
Integrating surface-mount gas sensors requires balancing board assembly reflow profiles against package outgassing limits. Reflow cycles peak at 260 degrees Celsius, potentially triggering secondary desorption states inside organic sensor housings. Calculating desorption rates during reflow profiles using Kissinger kinetic parameters prevents sensor contamination during automated placement.
According to IPC/JEDEC J-STD-033D Clause 5.2, components exposed to ambient humidity past their floor-life limits must undergo baking at specified temperatures, where incorrect kinetic assumptions reset the floor-life clock without removing deeply trapped moisture.
