Zero Calibration
At the base level of a transducer signal conditioning specification, zero-input electrical output defines the reference baseline from which all pressure measurements are calculated. Deviation from the ideal zero output under zero applied differential or gauge pressure is defined as pressure sensor offset. Piezoresistive bridge imbalances and parasitic resistances within signal paths generate this initial standing voltage.
Sensor testing protocols record this uncalibrated voltage under reference ambient conditions prior to span adjustment.
Thermal Sensitivity
Temperature changes induce differential thermal expansion between silicon diaphragms and ceramic substrates. Shift in zero offset across operating temperature ranges introduces measurement errors requiring dynamic thermal compensation.
Mechanical Stress
Package mounting torque transfers mechanical strain through housing materials directly into piezoresistive sensing elements. Unwanted stress shifts zero-pressure output voltages away from factory calibration values. Long-term mechanical relaxation of adhesive bonds leads to gradual zero point drift over operational cycles.
Compensation Method
Application-specific integrated circuits correct baseline deviation by injecting opposing offset voltages or applying digital correction factors stored in non-volatile memory. Automated calibration stations record zero-pressure outputs across multiple temperature steps to generate individualized calibration coefficients. Residual offset drift after calibration defines the minimum achievable measurement accuracy of the sensor system.