Temperature Correction
False signal components appearing in strain gauge data arise from the difference in thermal expansion between the sensor and the test specimen. Measurement systems subtract the thermal strain offset from the raw data to reveal the actual mechanical load applied to the structure. This correction is necessary because the metal foil of the sensor expands at a different rate than the steel or aluminum it is bonded to.
Expansion Differential
Physical growth of materials occurs at different rates as the environment warms or cools. The thermal strain offset represents the sum of the expansion of the gauge alloy and the change in its electrical resistance due to temperature. If a sensor is not matched to the expansion coefficient of the substrate, the resulting error can be many times larger than the signal from the mechanical load.
Measurement Stability
Stability of a long-term monitoring project depends on the accuracy of the polynomial used to calculate this value. Engineers determine the thermal strain offset by testing a sample sensor on a block of the same material in a temperature-controlled oven without any applied force. The resulting curve is programmed into the data logger to provide real-time compensation for weather or process heat.
Material Characterization
Validation of the expansion coefficients for new composite materials requires precise tracking of these thermal signals. Because every batch of resin or fiber can vary, the thermal strain offset must be verified for the specific material under test. Engineering teams often use a dummy gauge on an unstressed piece of the same material to provide a physical reference for this offset during field testing.