Measurement Mechanism
A polymer dielectric sensor translates moisture concentration changes into measurable electrical impedance. In this capacitive humidity sensor, a thin film of polymer or metal oxide absorbs water molecules from the surrounding air. The absorption alters the dielectric constant of the material, which directly modifies the electrical capacitance between the upper and lower electrodes.
A high-frequency alternating current is applied to the electrodes to measure this capacitive shift without causing polarization effects.
Component Structure
The physical assembly features a porous upper electrode that allows water vapor to pass through to the active dielectric layer. Below this layer, a solid lower electrode sits on a rigid ceramic substrate. This layout ensures rapid equilibrium with the surrounding atmosphere while maintaining mechanical stability.
Sensing Boundary
Condensation on the sensor surface causes immediate saturation and leads to persistent measurement errors. High humidity levels near one hundred percent risk the formation of liquid droplets, which short-circuits the dielectric behavior. Normal operation resumes only after the sensor is dried.
Calibration Reference
The secondary standard for instrument qualification utilizes saturated salt solutions to produce stable humidity environments. During factory calibration, the sensor output is verified against these fixed reference points to determine its transfer function. This calibration must be repeated annually to correct for polymer drift.