Value Shift
Progressive changes in the electrical resistance of a material occur independently of temperature changes. Resistance drift in temperature sensors is primarily caused by structural changes in the sensing element, such as grain growth or oxidation of the platinum wire. This phenomenon leads to a gradual loss of measurement accuracy over extended periods of operation.
Material Aging
Prolonged exposure to high temperatures accelerates the physical and chemical processes that alter the electrical properties of the metal. Trace impurities can diffuse into the platinum wire, while mechanical strain can relax or intensify depending on the thermal history of the sensor. These changes modify the resistivity of the material, shifting the baseline resistance of the thermometer.
This shift is particularly pronounced in environments where thermal cycling is frequent or extreme.
Metrological Consequence
Measurement errors resulting from this shift accumulate over time and lead to significant temperature offsets. In high-accuracy applications, even a tiny change in resistance can translate to a temperature error of several millikelvins. Technicians monitor these changes by measuring the resistance at the triple point of water at regular intervals.
Mitigation Technique
Thermal annealing and careful material selection reduce the rate of change during operation. High-purity platinum wire and strain-free mounting designs minimize the internal stresses that drive the shifting resistance. These design features extend the calibration interval and ensure the long-term stability of the instrument.