Sensor Enclosure
Structural housings must protect high-frequency transceivers from mechanical impact and weather without degrading signal propagation. In millimeter wave radar systems, a millimeter wave radome acts as the primary interface between the sensor array and the external environment. The choice of material and geometry determines the transmission efficiency and beam-forming accuracy of the radar.
Transmission Loss
Attenuation occurs due to the dielectric loss of the plastic and reflections at the boundaries. A radome that is poorly matched can decrease the detection range. Transmission loss is quantified during development.
Environmental Interaction
Dirt accumulation and water film formation on the external surface introduce phase errors and severe signal attenuation. Hydrophobic coatings are frequently applied to the outer face of the millimeter wave radome to promote water run-off and prevent the buildup of a continuous liquid sheet. The durability of these coatings is tested through accelerated weathering and abrasion cycles, which ensures that the radar maintains its performance under adverse field conditions.
Calibration Integrity
In production, each radome and sensor pairing is calibrated together to compensate for minor assembly variations. The residual phase error introduced by the housing is stored in the sensor memory as a correction matrix. This matrix is applied during real-time operation to ensure accurate angular estimates.