Protected Architecture
Protective packaging architectures enclose micro-electromechanical systems in a hermetically sealed environment at sub-atmospheric pressure. For devices such as gyroscopes and high-frequency resonators, vacuum encapsulated mems are required to eliminate air damping and protect sensitive components from humidity or contaminants. This environment is typically created using wafer-level bonding techniques.
Performance Improvement
Operating in a vacuum allows mechanical structures to vibrate with significantly higher quality factors and lower energy consumption. Vacuum encapsulated mems exhibit improved sensitivity and reduced thermal noise compared to those operating at atmospheric pressure. The absence of gas also eliminates the risk of squeeze-film damping, which can limit the motion of micro-mirrors or accelerometers.
These benefits are required for meeting the performance requirements of inertial navigation systems. Long-term stability of the vacuum level is essential for maintaining the calibration of the sensor over its lifespan.
Sealing Technology
The longevity of the device depends on the stability of the vacuum over several years. Different bonding methods, such as eutectic or anodic bonding, are used to create the hermetic seal in vacuum encapsulated mems. Getters are often placed inside the cavity to maintain the vacuum level by absorbing gases that outgas from the interior surfaces.
Inspection Routine
Verification of the seal integrity is performed using fine and gross leak tests. Vacuum encapsulated mems must pass these tests to ensure long-term reliability in the field.