Flexoelectric Interaction
Spatial variations in mechanical strain generate electric polarization in dielectric materials regardless of their crystal symmetry. This phenomenon, which relies on strain gradient coupling, arises because the non-uniform displacement of atoms breaks the local inversion symmetry of the lattice. Unlike piezoelectricity, which requires non-centrosymmetric crystals, this effect occurs in all dielectrics when they are bent or unevenly deformed.
Symmetry Breaking
Uniform deformation shifts the positions of atoms but does not induce polarization in centrosymmetric crystals. Through strain gradient coupling, the gradient of the strain creates an effective internal electric field by unequal shift of positive and negative sublattices.
Metrological Verification
Sub-micron cantilever bending experiments are used to measure the flexoelectric coefficients that quantify this mechanical-electrical interaction. In setups utilizing strain gradient coupling, a nanoscale force is applied to a thin beam while the generated charge is measured using a high-sensitivity electrometer. The mechanical deformation is simultaneously monitored using an atomic force microscope to ensure precise calculation of the strain gradient across the thickness of the beam.
Sensor Calibration
Environmental factors like surface charge and electrode chemistry can interfere with the measurement of gradient-induced polarization. To ensure the reliability of devices utilizing strain gradient coupling, the calibration process must account for the parasite capacitance and surface state density. This calibration is performed by comparing the measured output against a reference quartz standard under controlled temperature and humidity.
The resulting calibration curve is used to adjust the sensitivity factors in the signal processing unit of the microfabricated sensor.