Deposition Force
Downward force applied by the metal or polymer blade during the printing stroke drives the solder paste into the stencil apertures. Correct squeegee pressure ensures that the stencil makes consistent contact with the circuit board across its entire surface. The mechanical action prevents the blade from skipping over apertures or leaving a thick film of paste on the stencil top, which keeps the deposit volume controlled.
Calibration Metric
Calibration of the print head involves load cells that measure the force in kilograms or Newtons. Maintaining the right squeegee pressure is necessary to avoid excessive wear on the stencil and the blade. If the force is too high, it causes the blade to scoop paste out of larger apertures.
Mechanical Interaction
Variations in the flatness of the board or the stencil support lead to inconsistent results. High squeegee pressure can damage thin stencils or cause the paste to bleed under the edges of the apertures. Technicians adjust this setting based on the hardness of the squeegee material and the length of the blade.
The optimal setting is the minimum force required to wipe the stencil surface clean in a single pass.
Outcome Verification
Inspection systems monitor the resulting paste height to confirm the setting is correct. Volume data validates the pressure adjustment.