Sensor Performance
Measurement capability defines the degree of closeness of a sensed value to the true pressure applied to the transducer. The pressure module accuracy represents this parameter, indicating the limits of error under specified operating conditions. This value is critical for selecting the correct reference standard for calibration.
Calibration Traceability
Reference standards used in field calibration must have an uncertainty that is much smaller than the device under test. The pressure module accuracy is verified by comparing the module readings against a deadweight tester or a high-precision controller. This process establishes the necessary traceability chain for industrial measurements.
Performance Factor
Temperature compensation is essential for maintaining precision across varying field conditions. The pressure module accuracy often includes the effects of temperature over a specified range, although some modules require separate correction factors. High-performance modules use internal temperature sensors to automatically adjust the output, which protects the measurement from the sudden temperature swings encountered in outdoor industrial environments.
Accuracy Limit
Metrological specifications use a percentage of full scale or a percentage of reading to define these limits. When the pressure module accuracy is expressed as a percentage of reading, the absolute uncertainty decreases at lower pressures. This allows the same module to be used for a wider range of testing.