Signal Processing
Synchronous detection extracts the amplitude and phase of a specific frequency component from a noisy signal by multiplying the input by a reference waveform. Phase sensitive demodulation enables the recovery of low-level data that is buried beneath broadband interference or thermal noise. This technique is a fundamental component of lock-in amplifiers and optical encoders where the signal of interest is modulated at a known frequency.
Mathematical Function
The multiplication of the modulated input and the local oscillator produces a result with a DC component and a high-frequency component. Low-pass filtering removes the sum frequency, leaving a signal that is proportional to the product of the input magnitude and the cosine of the phase difference. If the phase sensitive demodulation system is correctly aligned, the output provides a precise measurement of the sensor displacement or the material property being interrogated.
Interference Rejection
Noise signals that are not coherent with the reference frequency are averaged to zero by the summation process. This selective filtering allows the instrument to operate with an extremely narrow bandwidth, which greatly improves the signal-to-noise ratio compared to a simple peak detector. The rejection of out-of-phase components ensures that only the relevant physical interaction is recorded by the acquisition system.
Because the bandwidth is inversely proportional to the time constant of the filter, a narrower bandwidth requires a trade off between measurement speed and increased resolution.
Calibration Requirement
Phase shifts introduced by cables or preamplifiers must be compensated to prevent errors in the magnitude calculation. A calibration routine determines the offset between the source and the detector to ensure the measurement remains accurate across the full operating range of the instrument.