Sensing Geometry
Closed-loop wire assemblies are positioned to surround the entire circumference of a cylindrical test specimen during continuous inspection. An encircling coil is primarily used for testing tubes, rods, and wires during the manufacturing process to detect surface and internal defects. The test specimen passes through the center of the sensor, allowing for rapid and automated high-speed inspection.
Excitation Field
Alternating currents flowing through the winding generate a uniform magnetic field that is parallel to the longitudinal axis of the specimen. As the material travels through the encircling coil, eddy currents flow in closed circular loops perpendicular to the magnetic flux lines. Any longitudinal defect or crack that disrupts this flow will alter the coil impedance.
This setup provides a complete inspection of the outer surface and near-surface regions of the product.
Detection Limitation
Internal defects located deep within the center of thick-walled specimens are difficult to detect due to the skin effect. The magnetic field strength decreases exponentially with depth, which limits the effective penetration of the eddy currents. This boundary means the sensor is best suited for thin-walled tubing or outer-diameter surface anomalies.
Operational Speed
High-speed manufacturing lines require fast signal processing to handle the rapid movement of the product. The signal sampling rate must be high enough to capture small defects at speeds exceeding several meters per second. This ensures that the reject mechanism is triggered accurately.