Mechanical Compression
Injection of molten polymer around semiconductor packages exerts pressure on the internal components as the compound cools and shrinks. This induced mechanical load, referred to as overmolding strain, alters the operating characteristics of delicate micro-machined sensors. It can cause permanent offset shifts in high-precision transducers.
Controlling the cooling rate helps to reduce these residual stresses.
Silicon Sensitivity
Micro-machined silicon structures are highly sensitive to external mechanical forces due to the piezoresistive effect. When subjected to overmolding strain, the resistance of the integrated circuits shifts, directly translating into output errors. This sensitivity is particularly problematic for pressure and inertial sensors that rely on free-moving structures.
Using a soft gel coat over the die prior to molding creates a mechanical buffer that reduces the transmitted strain. This buffer ensures that the sensor maintains its baseline accuracy.
Thermal Cycling
Operating temperature swings expand and contract the protective plastic compound and the internal silicon die at different rates. This differential expansion during temperature cycles modulates the overmolding strain, causing the sensor output to drift. High-temperature testing helps to characterize these thermal-stress profiles.
Having this data allows the calculation of compensation coefficients to correct for the thermal variations.
Defect Mitigation
Package designers select molding compounds with low shrinkage and low coefficients of thermal expansion to protect the internal die. They measure the overmolding strain using embedded test structures to evaluate the performance of different materials. This testing occurs during the prototype phase to qualify the manufacturing process.
Selecting the proper compound reduces the rejection rate at the end of the assembly line.