Field Validation
Validation protocols compare in-situ sensor data against laboratory analysis of water samples to determine the accuracy of oceanographic instruments. A niskin bottle cross calibration involves closing a plastic sampling tube at a specific depth where conductivity and temperature sensors are also recording. After the package returns to the surface, the water inside the bottle is analyzed for salinity and dissolved oxygen.
These discrete points provide a truth value that identifies any drift or bias in the electronic sensors.
Sample Integrity
Reliability depends on the bottle sealing tightly. If the end caps leak, the niskin bottle cross calibration will yield an incorrect offset.
Data Reconciliation
Analysts match the timestamp of the bottle closure with the corresponding record in the sensor data stream. This alignment ensures that the niskin bottle cross calibration accounts for the exact environmental conditions present at the moment of sampling. Because the ship moves and the sensor package bounces on the wire, the water sampled might be slightly different from the water the sensor saw.
Statistical averaging of the sensor data over the closure interval helps reduce the noise in the comparison.
Bias Correction
Results from the laboratory analysis are plotted against the sensor readings to calculate a slope and offset for the deployment. This niskin bottle cross calibration allows researchers to correct for the gradual fouling of the sensor electrodes that happens during long voyages. Without this procedure, the electronic data would lack the traceability required for multi-year climate studies.