Dimensional Change
Volume increases in epoxy-based encapsulation materials occur when they absorb water molecules from the surrounding atmosphere. Mold compound hygroscopic expansion represents a major source of long term drift in precision electronic components. Swelling causes pressure.
This physical distortion changes the electrical characteristics of sensitive circuits through the piezoresistive effect.
Stress Generation
Internal forces resulting from this swelling are often non-uniform across the surface of the component. Mold compound hygroscopic expansion can warp the package and cause delamination at the interfaces between different materials. In high precision sensors, this expansion leads to a shift in the offset voltage and sensitivity.
Designers mitigate these effects by selecting compounds with low moisture absorption rates or by adding protective coatings to the die.
Expansion Measurement
Characterizing this behavior involves tracking the weight and dimensions of the package in controlled humidity chambers. Precise scales measure the mass of the absorbed water while thermomechanical analyzers detect the micron-scale changes in geometry. Data from these tests allow engineers to predict the drift of a sensor over its operating life.
These measurements are typically performed at various temperatures to account for the accelerated diffusion of moisture.
Stability Boundary
Expansion is often reversible when the component is baked to remove the moisture. However, the mechanical damage caused by repeated expansion and contraction cycles can lead to permanent failure.