Inspection Protocol
Procedures for the electrical conductivity testing of aluminum alloys ensure that material properties meet aerospace design requirements. Application of mil-std-1537c standardizes the use of eddy current instruments to verify heat treatment and detect potential degradation.
Probe Calibration
Comparison against primary or secondary standards with known conductivity values is mandatory for instrument validation. Under mil-std-1537c, the equipment must be capable of resolving small percentage changes in the international annealed copper standard (iacs) scale. Probes are selected based on the thickness of the part to ensure the magnetic field penetrates to the required depth.
Surface Preparation
Contaminants or heavy oxidation on the surface can interfere with the coupling between the coil and the metal. Guidelines in mil-std-1537c specify the cleaning methods and the acceptable level of lift-off compensation for the sensor. Proper alignment and steady pressure are necessary to produce repeatable readings across multiple inspectors.
This prevents false rejection of conforming parts and ensures the reliability of the conductivity data.
Compliance Requirement
Certification of personnel conducting the tests is a requirement for meeting the defense specification. Results are recorded in a format that allows for historical tracking of the component’s metallurgical state. Consistent application of these rules prevents the use of improperly processed parts.