Scaling Constant
Proportionality factors define the relationship between the pulse frequency of a flow meter and the volume of fluid passing through it. Technicians perform k-factor calibration to ensure the digital output matches the physical displacement. This value varies across the operating range of the instrument due to changes in fluid viscosity or velocity.
Most meters provide a nominal value that requires verification under field conditions.
Flow Calculation
Volumetric measurement accuracy depends on the stability of this numerical multiplier. During k-factor calibration, the system compares the meter output against a master reference standard. The resulting data points generate a curve that compensates for non-linear behavior at low flow rates.
High-precision applications require a multi-point check to maintain uncertainty within specified limits.
Linearity Deviation
Variations in the flow profile can alter the effective response of the sensor. If the k-factor calibration shows a deviation exceeding the tolerance set by the manufacturer, the electronics require an adjustment. This drift often stems from mechanical wear in turbine blades or build-up on the interior walls of the pipe.
Metrological Traceability
Calibration certificates document the chain of measurement back to national standards. A valid k-factor calibration includes the ambient temperature and pressure at the time of the test. These conditions must remain stable to prevent interference from thermal expansion.
Periodic re-certification ensures the meter continues to meet the operational requirements of the process.