Voltage Spike
Rapid changes in the state of an electrical circuit generate temporary oscillations that exceed the nominal operating voltage. A switching transient occurs when the stored energy in an inductor or capacitor is suddenly released. These events last for only a few microseconds and cause stress on the insulation of the system.
Rise Time
Velocity of the transition determines the frequency content of the electrical noise. In a switching transient, a faster change leads to higher frequency components that can couple into nearby signal lines. Measuring this speed requires high-bandwidth oscilloscopes and low-inductance probes.
Snubber Circuit
Protective components are installed to absorb the excess energy and dampen the oscillation. Suppressing a switching transient often involves the use of resistors or specialized suppression diodes. This mitigation prevents the peak voltage from exceeding the breakdown limit of the semiconductor switches.
Electromagnetic Noise
Radiant energy from the circuit can interfere with the operation of sensitive sensors or communication links. A switching transient is a primary source of conducted and radiated emissions that must be managed to meet regulatory standards. Shielding and filtering are the standard methods for containing these disturbances within the power stage.
Engineers characterize these spikes to ensure that the control logic remains stable during the operation of high-power converters.