Coordinate Representation
Orthogonal projection of real resistance against imaginary inductive reactance provides the standard analytical plane for quantifying coil-material electromagnetic interactions. Designated in non-destructive testing as the impedance plane, this complex representation charts changes in test coil electrical response caused by conductive and ferromagnetic test specimens. Sensor responses plot as discrete vector coordinates, where the horizontal axis tracks ohmic losses and the vertical axis registers magnetic flux linkage.
The representation ceases to describe system behavior when core saturation drives inductive components into non-linear, multi-harmonic states.
Locus Dispersion
Operating frequency variations cause the normalized coil response to trace characteristic spiral loci on the coordinate axes. Within the impedance plane, increasing test frequency drives the complex coil response downward and toward higher resistive loss before curling toward the origin as skin depth decreases. Material conductivity shifts displace the operating point along these continuous loci, allowing metrologists to isolate alloy compositions from geometric variations.
Material thickness variations manifest as phase shifts relative to the primary air point calibration coordinate.
Liftoff Trajectory
Spatial separation between the probe face and the test piece traces an unmistakable trajectory across the quadrant. In typical displays based on the impedance plane, lifting the coil away from a conductive plate produces an arc returning directly to the empty-coil balance point. Calibrated instruments rotate instrument display axes so that liftoff responses align strictly along the horizontal axis, leaving orthogonal defect signals isolated on the vertical axis.
Phase rotation adjustments must be verified against certified calibration blocks before each shift. Inaccurate angle alignment causes probe wobble to mask small flaw indications in automated inspection systems.
Reference Normalization
Standard calibration protocols convert raw ohms and henries into dimensionless coordinate values by dividing by the isolated coil inductive reactance. On this normalized impedance plane, diverse coil designs exhibit comparable signal trajectories across standardized conductive test samples. Calibration procedures log balance points in ambient air before coupling the sensor to certified resistivity standards.
The resulting dimensionless coordinate maps define repeatable inspection thresholds across diverse manufacturing environments.