Site Adjustment
Periodic alignment of a sensor output to match a reference standard ensures accuracy within the specific environmental conditions of the installation. Performing field recalibration corrects for errors introduced by local temperature gradients or electromagnetic interference that differ from factory settings. This procedure maintains the integrity of the data stream without removing the instrument from the process line.
Reference Transfer
A portable calibrator provides the physical quantity used to verify the sensor reading. The technician compares the device output against this secondary standard to determine the absolute offset.
Installation Effect
Mounting orientations and mechanical stress often introduce subtle shifts in the baseline signal of a pressure or flow sensor. These localized factors remain invisible during laboratory testing but become apparent once the hardware is integrated into a larger system. By adjusting the zero and span settings under actual load, the process technician accounts for the specific physics of the piping or housing.
This step minimizes the drift that results from the physical connection between the sensing element and the process medium.
Tolerance Verification
The final output must fall within a predefined percentage of the reference value to meet the qualification criteria. Failure to reach this limit necessitates a full replacement of the sensing hardware.