Interface Physics
Electrostatic energy storage occurs at the boundary where a solid conductor meets a liquid electrolyte. This interface generates a double-layer capacitance that behaves as a high-density capacitor without physical dielectric layers. The separation of charge spans a distance of only a few angstroms, resulting in a large capacitance per unit area.
Charge Storage
Voltage modulation controls the density of the accumulated charges. When an external potential is applied, ions of opposite polarity assemble near the electrode surface to balance the electronic charge. In electrochemical sensors, this double-layer capacitance must be accounted for during alternating current measurements because it runs parallel to the faradaic charge transfer.
The magnitude of this capacitance depends on the electrode area and the ionic concentration.
Sensor Impedance
Measurement systems characterize this boundary using electrochemical impedance spectroscopy. Applying a small sinusoidal voltage across a range of frequencies allows the instrumentation to separate the capacitive response from the resistive components of the solution. Because double-layer capacitance varies with the applied bias voltage, precise control of the working electrode potential is required during analysis.
Interference Variable
Signal perturbation occurs when temperature or concentration shifts. A rise in temperature increases the thermal agitation of the ions, which decreases the double-layer capacitance by widening the diffuse layer. Sensor calibration routines must incorporate compensation models to correct for these thermal variations during field operation.