Fluidic Retention
Fluidic systems require precise volumetric control to prevent the retention of unmeasured or unrecoverable sample within internal channels and connections. In analytical instruments, dead volume represents the static fluid trapped in fittings, valves, and tubing that does not actively participate in the primary flow path.
Measurement Precision
Chemical carryover and peak broadening occur when stagnant fluid slowly diffuses back into the active stream. In high-performance liquid chromatography, excess dead volume degrades separation resolution by causing narrow sample bands to disperse as they travel from the injector to the detector. Minimizing these unswept zones is essential for maintaining accurate quantification of low-concentration analytes.
Instrument Design
Zero-dead-volume fittings and short, narrow-bore capillary tubing are utilized to connect system components. The selection of valve geometries with minimal internal cavities prevents sample pooling during injection cycles. When designing microfluidic channels, engineers use tapered transitions to avoid sharp corners where fluid can become trapped and resist flushing.
These physical design choices ensure that the entire sample volume is swept through the measurement cell, maintaining high analytical sensitivity and preventing cross-contamination between sequential runs.
Verification Method
Gravimetric testing with high-purity solvents determines the actual internal volume of the system compared to the theoretical design. A displacement of a known mass of fluid allows the calculation of the total fluidic path volume. Discrepancies between the expected and measured values identify regions of unintended fluid retention.