Mechanical Evaluation
Mechanical testing of printed circuit assemblies establishes the physical limits before copper traces fracture or solder joints disconnect. This process, often designated as board flex testing, subjects a populated board to controlled deflection by applying pressure at specific points until a defined displacement is reached. The test measures the ability of surface mount components to withstand handling during assembly and manual chassis installation, though it does not evaluate long-term thermal fatigue.
Deformation Limit
Deflection limits are specified in millimeters of travel and depend on substrate thickness. In standard board flex testing, a test fixture supports the assembly at two points while a single anvil presses the center of the opposite side. The system records the resistance across daisy-chained solder joints to catch electrical discontinuities.
Deflection normally stops at two millimeters for consumer electronics.
Solder Integrity
Cracking within the ceramic bodies of multilayer capacitors represents the most common failure during bending. Since ceramic materials resist compression but fail under tension, board flex testing places these components on the convex surface to maximize stress. The resistance measurement reveals microcracks that remain hidden under normal visual inspection.
Engineers use these test results to modify the placement of sensitive parts. This ensures that delicate ceramic components do not sit near high-stress areas during subsequent handling, reducing risk before shipping.
Verification Protocol
Industry standards define mechanical requirements. IPC-9702 guides the characterization of strain during board flex testing to prevent overstress during production. Calibration occurs annually.