Control Process
Continuous correction of baseline instability in a sensor output removes the slow drift caused by thermal expansion or electronic aging. Zero-point wander compensation applies a real-time adjustment to the measured value to maintain the reference point of the instrument. This technique is used in high-precision weighing scales and pressure transducers where the signal must remain stable over long periods of operation.
Correction Mechanism
Periodic re-zeroing or the use of a reference channel allows the system to identify the magnitude of the drift. In an automated system, zero-point wander compensation happens during idle moments when the load is removed, allowing the software to reset the baseline to the nominal value. If the sensor is under constant load, a secondary temperature sensor may provide the data needed to calculate and subtract the thermal component of the wander.
Rate Constraint
Magnitude of drift and the resolution of the compensation DAC limit the effectiveness of the correction. If the zero-point wander compensation frequency is too low, the baseline may shift between updates, introducing a measurement error. The system must distinguish between a genuine change in the input signal and a drift in the sensor hardware to avoid suppressing the data of interest.
Long-term Stability
Drift is quantified by the magnitude of the residual error after the adjustment has been applied. Manufacturers specify this value in parts per million over a given time interval to define the expected performance of the device.