Response Deviation
Dynamic response deviations represent the amount by which a sensor output exceeds its steady-state value during a rapid step change. A large transient overshoot indicates that the measurement system is underdamped and may oscillate before settling. This behavior is common in piezoelectric sensors subjected to rapid pressure rises, where the rapid energy transfer excites the natural frequency of the sensing element.
Damping Relationship
The amplitude of this deviation is directly related to the damping ratio of the sensor assembly. An undamped system will produce a larger peak, whereas a critically damped system will approach the steady-state value without any deviation. Engineers adjust damping to minimize this peak while keeping rise times short.
Metrological Error
False peaks from this effect can be mistaken for actual pressure spikes, leading to incorrect system actions or alarms. Standard calibration protocols measure this value to determine the dynamic limit of the system. Compensation filters are then applied to the data to correct for the error.
Verification Test
Step-response tests, such as those performed in shock tubes, are used to measure the peak deviation. This measurement is expressed as a percentage of the steady-state step amplitude. The resulting value is recorded on the calibration certificate.