Metrological Traceability
Primary deadweight lever arms establish the reference rotational moment standards used to verify the scale accuracy of rotational transducers. A torque calibration compares the electrical output of a strain gauge or optical torque sensor against known applied moments under controlled environmental conditions. This procedure determines linearity and hysteresis characteristics across the full measuring range of the device.
The metrological chain remains valid only when lever arm length and mass standards carry active calibration certificates.
Transducer Alignment
Precision couplings connect the calibration spindle to the reference beam without introducing axial forces. The torque calibration evaluates transducer response under pure torsional loading across clockwise and counterclockwise directions.
Parasitic Loading
Misalignment between the calibration rig axis and the sensor shaft introduces bending moments and shear forces that distort strain gauge bridge outputs. During torque calibration, friction within support bearings generates parasitic resistance that leads to false hysteresis indications. Temperature fluctuations alter lever arm length and strain gauge sensitivity factors, shifting span calibration values.
Implementing flexible flexure couplings and thermal compensation algorithms suppresses these parasitic interference mechanisms.
Verification Class
Conformity assessment according to ISO 6789 or DIN 51309 categorizes the sensor into a specific accuracy class based on maximum expanded uncertainty limits. The completed torque calibration provides the certified sensitivity factor programmed into industrial process monitoring systems.