Sensor Disturbance
Electromagnetic thickness measurements are susceptible to measurement errors when the substrate material beneath a coating influences the sensor signal and distorts the output. Quality control inspectors identify substrate interference as a major source of measurement drift when the base metal thickness falls below the minimum required threshold, preventing the sensor from establishing a stable magnetic loop. This effect occurs when the sensor magnetic field penetrates through the coating and enters the underlying substrate, which alters the measured impedance of the sensing coil.
Sensing Resolution
Thicker coatings or thinner substrates increase the risk of the sensor field detecting the background material. Sourcing engineers specify the minimum substrate thickness required for accurate measurement. Calibration must occur on a bare substrate of identical thickness and composition to negate this effect.
Metrological Bounds
Compensation algorithms can reduce the error if the substrate properties are uniform and known. A variation in substrate conductivity or permeability introduces systematic errors that cannot be corrected easily. Testing protocols define the boundary beyond which the substrate thickness no longer alters the coating measurement.
Verification Standard
Traceable reference foils of known thickness are used to verify sensor calibration on the specific substrate material. The verification process is performed before each measurement series to ensure the sensor response is calibrated. Sourcing standards require that reference blocks match the metallurgical properties of the production parts.