Geometric Ratio
Mechanical discontinuities in structural elements interrupt the uniform flow of internal stress fields under applied loads. The stress concentration factor represents the dimensionless ratio of peak local elastic stress at a geometric discontinuity to the nominal background stress across the uniform net section. This dimensionless parameter quantifies localized stress elevation caused by holes, keyways, fillets, or thread roots.
Elastic Magnification
Abrupt changes in cross-sectional geometry alter stress stream lines, crowding force lines near internal radii boundaries. The theoretical factor depends strictly on component geometry and loading mode, remaining independent of material yield strength in linear elastic regimes. Sharper notch radii generate steeper stress gradients and higher peak stresses at the notch tip.
When localized peak stress exceeds material yield strength, localized plastic deformation redistribution reduces effective stress concentrations under static loading. Under cyclic loading conditions, localized yielding initiates microcracks that reduce overall fatigue capability.
Fatigue Sensitivity
Ductile materials redistribute localized static stresses through local plastic yield, mitigating failure risks under steady loads. Brittle materials lack plastic yield capability, making components vulnerable to sudden fracture at geometric notches. Dynamic load spectrums amplify notch sensitivity, requiring notch factors in fatigue life calculations.
Experimental Verification
Photoelastic stress analysis and digital image correlation measure localized surface strain fields on loaded physical specimens. Finite element analysis models generate high-density mesh simulations around geometric discontinuities to calculate theoretical factors. Calibration reports validate numerical simulation models against strain gauge measurements on physical test coupons.