Transduction Factor
Piezoresistive or capacitive changes per unit of mechanical deformation quantify how effectively a sensor converts physical stretching into an electrical signal. In strain gauge design, strain sensitivity is commonly represented by the gauge factor, which relates fractional change in resistance to mechanical strain. This coefficient determines the minimum detectable deformation that the instrument can resolve.
Calibration Routine
Metrology laboratories evaluate this parameter by mounting the sensor onto a cantilever beam subjected to a known bending force. Through these measurements, the strain sensitivity is calculated across a range of deformation levels to establish the sensor’s linearity. This test ensures that subsequent measurements in the field can be accurately translated into force or stress units.
Environmental Interference
Fluctuations in ambient temperature can induce thermal expansion in the sensor material, which produces a false strain signal. To counteract this issue, strain sensitivity values must be adjusted using temperature compensation circuits or dummy gauges that cancel out the thermal component. This step is necessary when sensors are installed on outdoor structures like bridges where temperature varies widely.
Structural Boundary
Excessive mechanical loading can stretch the sensing element past its elastic limit, causing permanent plastic deformation. This damage permanently alters the calibration.