Sensing Mechanism
Micro-electromechanical pressure measurements depend on the physical deflection of a thin micro-machined layer under applied force. A silicon membrane sensor utilizes this deflection to change the electrical resistance of integrated piezoresistive elements. This electrical shift is proportional to the pressure difference across the membrane.
Calibration Requirement
High-accuracy instrumentation requires that each sensor undergo zero-point adjustment to correct for manufacturing variations. In a silicon membrane sensor, thermal expansion of the housing can introduce stress that appears as a false pressure reading. Calibration algorithms in the host processor adjust the raw output using a stored temperature profile.
Deflection Limit
Structural limits of the micromachined material define the maximum pressure the device can withstand without fracturing. When a silicon membrane sensor experiences an over-pressure event, the membrane can rupture and destroy the circuit. Engineers design physical stop-plates below the membrane to limit its movement during extreme pressure spikes.
Operational Constraint
Chemical compatibility of the media being measured is a critical consideration for sensor longevity. Because the silicon membrane sensor is thin, corrosive gases or liquids can etch the surface and change its mechanical stiffness. Protective coatings like parylene or gel layers are applied to shield the silicon from direct contact with hostile chemicals.
This protective layer ensures that the sensor maintains its sensitivity and does not drift over years of service in harsh environments.