Stress Mapping
Depth-dependent distribution of internal tensions within a material characterizes the mechanical state of a component after manufacturing or surface treatment. Residual stress profile measurement quantifies how these stresses vary from the surface into the bulk of the part. This data is essential for predicting the fatigue life and dimensional stability of critical aerospace and automotive structures.
Analytical Method
X-ray diffraction and hole-drilling are the primary techniques used to determine the magnitude and direction of the subsurface forces. The x-ray method measures the lattice strain by observing the shift in diffraction peaks at different tilt angles, while the hole-drilling method monitors the relaxation of the surface as material is removed. A residual stress profile is constructed by performing these measurements at incremental depths using electrochemical polishing to expose new layers without introducing additional stress.
Process Effect
Shot peening and laser shock peening are used to induce compressive stresses at the surface, which inhibit the initiation and growth of cracks. A typical residual stress profile for a peened surface shows a peak compression just below the top layer, followed by a transition to tensile stress in the core to maintain equilibrium. If the compressive layer is too shallow, the component remains vulnerable to environmental degradation or surface damage.
Validation Standard
Measurement accuracy is verified against reference blocks with known stress states established by neutron diffraction. These standards ensure that the instrument calibration is consistent with the international requirements for structural integrity assessment.