Signal Transformation
Impedance changes in alternating current circuits are represented by vector shifts that correspond to changes in amplitude and phase during sensor interaction with a conductive test object. Eddy current instruments employ phase angle rotation to align the lift-off signal horizontally and isolate it from material thickness changes, allowing the operator to distinguish between surface conditions and subsurface flaws. This adjustment separates the desired material properties from sensor lift-off to ensure accurate thickness profiling.
Instrument Adjustment
Hardware controls or digital algorithms rotate the impedance vector by a specified number of degrees. The alignment is performed during setup using a reference standard with known defects or variations. Technicians verify that the rotated signal falls within the designated alarm window of the instrument.
Phase Calibration
Precision calibration of the phase rotation is critical to prevent leakage of the lift-off signal into the measurement channel. A drift in the phase angle alters the measurement sensitivity and leads to incorrect defect classifications. Standardized reference blocks are used to verify the phase rotation accuracy at periodic intervals.
Tolerance Limits
Environmental factors like temperature change can cause drift in the electronic phase shifting circuitry. High-quality instruments incorporate temperature compensation to stabilize the vector position. Sourcing specifications define the maximum allowed phase drift over the entire operating temperature range.