Thermal Transducer
Specialized resistive transducers designed for operation above three hundred degrees Celsius track structural deformation in extreme environments. Implementation of high temperature strain gauges allows for the monitoring of turbine blades and exhaust manifolds. These devices differ from standard foil gauges by using alloys and adhesives that resist oxidation and creep at elevated levels.
Gauge Attachment
Nickel chromium or platinum tungsten alloys provide the necessary stability for the resistive filament. Attachment of high temperature strain gauges often requires ceramic cements or flame sprayed alumina to withstand the environment. Weldable variants offer an alternative for rapid installation on steel components.
These materials maintain their electrical properties even as the base metal begins to glow.
Resistance Correction
Thermal expansion of the gauge grid and the test specimen produces a change in resistance unrelated to the applied mechanical load. Correction curves for high temperature strain gauges subtract this parasitic effect to reveal the true stress induced signal. Lead wire resistance changes must also be compensated using three wire or four wire bridge configurations.
Operational Lifespan
Cyclic loading at high heat eventually degrades the bond between the sensor and the part. Performance of high temperature strain gauges is limited by the gradual oxidation of the thin wire filaments. Sensors eventually fail through open circuits or excessive signal noise.