Mitigation Technique
Design modifications in multilayer printed circuit boards alter the underlying copper structure to minimize parasitic effects at high frequencies. Applying ground plane voiding pad capacitance reduction techniques involves removing a portion of the reference plane directly beneath surface-mount component pads. This physical modification lowers the local capacitive coupling to ground, preventing signal distortion.
It is particularly useful for high-speed transmission lines where pad geometry would otherwise create an impedance discontinuity.
Capacitive Effect
Every surface-mount pad forms a parallel-plate capacitor with the reference plane situated on the adjacent layer. By implementing ground plane voiding pad capacitance is reduced because the distance between the pad and the nearest copper layer increases. This reduction in parasitic capacitance prevents high-frequency signals from leaking to the ground return path.
Consequently, the rise time of digital pulses is preserved across the component junction.
Impedance Matching
Removing the reference plane below the pad increases the characteristic impedance of the transmission line at that specific point. This adjustments helps maintain a continuous fifty-ohm environment across the entire signal path. Eliminating the capacitance spike reduces return loss and prevents signal reflections.
Fabrication Process
Creating these copper voids requires precise alignment between the signal layer and the inner reference layers during the board lamination process. Board manufacturers must control the registration tolerance to ensure that the void aligns perfectly with the center of the surface-mount pad. Errors in alignment can cause asymmetric capacitance, which leads to signal degradation in differential pairs.
Time-domain reflectometry is used to verify the effectiveness of the voiding and to ensure that the trace impedance remains within the specified five percent tolerance band.