Bonding Mechanism
Semiconductor substrates are joined through an intermediate alloy layer that undergoes a solid to liquid phase transition at a specific temperature. This thermal fabrication process relies on eutectic wafer bonding to establish hermetic encapsulation for micro-electro-mechanical systems. It achieves a mechanically stable and low resistance electrical interface without requiring high curing temperatures or high voltage.
The joint forms when the selected metals, typically gold and tin or aluminum and germanium, are brought into contact under pressure and heated to their mutual eutectic point. At this temperature, the material melts and subsequently solidifies during cooling, creating an impermeable barrier.
Interface Metallurgy
Surface preparation dictates the overall success of the joint formation. In eutectic wafer bonding, native oxides and contaminants block the necessary diffusion between the metallic films. Sputtering or electroplating depositions must occur with tight thickness tolerances to maintain the correct stoichiometric ratio.
If the composition shifts away from the eutectic point, the required melting temperature increases, leaving areas unbonded and prone to structural failure.
Process Parameter
Temperature control governs the solidification profile across the entire surface of the wafer. When performing eutectic wafer bonding, engineers apply mechanical force to overcome local surface roughness and ensure uniform metal contact. Heating occurs in a vacuum or an inert gas environment to prevent oxidation during the thermal cycle.
The pressure must be distributed evenly to avoid cracking the silicon. A slow, controlled ramp-down phase prevents high internal stresses and minimises microscopic voids at the interface.
Defect Vulnerability
Visual inspection cannot reveal internal voids or incomplete diffusion layers. Instead, acoustic microscopy and helium leak testing measure the long-term reliability of the seal. Localised pressure variations during assembly leave unbonded pockets that act as stress concentrators.
Exposure to mechanical vibrations eventually leads to micro-cracking and a loss of package hermeticity.