Rheological Behavior
Fluid behavior that changes under mechanical strain describes how potting materials and industrial adhesives flow during dispensing operations. Utilizing viscosity thixotropy in formulation design ensures that a material remains highly fluid while being pumped through a nozzle but becomes thick and immobile once deposited on a circuit board. This change prevents the compound from spilling over the edge of the assembly.
Dispensing Mechanics
Automated fluid deposition systems must adjust their pressure settings based on the flow resistance of the resin. When viscosity thixotropy is present, the apparent viscosity of the compound drops as the shear rate increases during the dispensing cycle. This decrease allows for faster deposition rates and cleaner cutoffs at the end of each stroke.
Process Recovery
Time-dependent recovery of fluid structure is necessary to maintain the shape of the deposited material before curing begins. After the shear stress of dispensing is removed, viscosity thixotropy dictates how long the resin takes to return to its high-viscosity state. If the recovery is too slow, the potting compound will run and spread beyond its intended boundary.
Shear Action
Chemical formulators add specialized rheology modifiers to polymer resins to achieve the desired flow characteristics. Under low-shear conditions, the internal structure of these additives forms a network that resists flow. When shear force is applied, the network breaks down and the fluid flows easily, but it rebuilds itself gradually once the force is removed.
This reversible behavior is measured using high-precision rotational rheometers that record changes in torque over a range of shear rates. These measurements are used to calibrate the dispensing equipment to ensure uniform bead size on the production line.