High Input
Minimum voltage level that a digital input receiver requires to reliably interpret a signal as a high state constitutes a crucial specification for logic interfaces. This parameter, designated as vih, must be lower than the output high voltage of the driving gate to ensure error-free communication. A system designed with a margin between these levels avoids noise-induced errors.
Voltage Specification
Device datasheets specify this limit as a percentage of the supply voltage or as a fixed voltage value. For typical logic gates, the vih value is set to seventy percent of the supply rail.
Interface Compatibility
Mixed-voltage systems must align these levels across different supply domains to prevent communication failures. For example, a five-volt transmitter cannot directly drive a three-point-three-volt receiver if the receiver vih is too high. Level-shifting transceivers resolve this difference by translating the logic levels dynamically.
Testing Procedure
Production testing verifies the parameter by applying the minimum specified voltage to the input pins while checking the output of the device under test. The tester sweep checks that vih is maintained across temperature extremes and supply voltage variations. This test confirms that the input circuitry complies with the semiconductor specification before shipment.
Without this verification, marginal receivers could pass into the field and cause intermittent failures in final products.