Interconnect Geometry
Vertical conductors integrated directly into the landing areas of surface mount components allow for higher routing density on a printed circuit board. Using via in pad technology eliminates the need for separate fan-out traces that occupy valuable surface space.
Manufacturing Quality
Plated holes are filled with conductive or non-conductive epoxy and then capped with copper to create a flat surface. In a via in pad design, the flatness of the cap is necessary to prevent solder wicking during the reflow process. Incomplete filling can lead to air bubbles that expand and cause the solder joint to fail under thermal stress.
Signal Integrity
Shortening the distance between the component pin and the internal signal layers reduces parasitic inductance. A via in pad structure minimizes the loop area for high speed signals and improves the performance of decoupling capacitors. The reduction in stub length also helps to mitigate reflections in gigahertz circuits.
Design Consideration
Production costs are higher due to the additional steps of filling and planarization required during fabrication. While via in pad saves space, it also places higher demands on the registration accuracy of the drilling process. Designers must balance the benefits of miniaturization against the increased complexity of the assembly.