Validation Process
Validation processes that confirm the accuracy and uniformity of temperature control within a controlled environment enclosure ensure the integrity of environmental testing. Mapping the internal volume with a grid of traceable sensors detects cold spots or temperature fluctuations. The goal is to verify that the temperature reported by the chamber controller matches the actual conditions experienced by the device under test.
Spatial Uniformity
A single sensor at the center of the workspace rarely represents the conditions at the corners or near the fan intake. Effective thermal chamber calibration identifies the working zone where the temperature remains within the specified tolerance. This mapping must be repeated at the minimum and maximum extremes of the chamber range.
Traceability Chain
The reference probes used for the verification must be calibrated in a primary laboratory against international standards. When performing thermal chamber calibration, the uncertainty of the reference system must be lower than the tolerance of the chamber itself. Documentation includes the drift observed in the chamber over a set period of stability.
Stability Check
The ability of the enclosure to maintain a constant temperature despite changes in the external room environment is a primary performance factor. While thermal chamber calibration focuses on the steady state, the recovery time after the door is opened is also measured. Regular intervals for this service prevent errors in sensor qualification that could lead to false failures in production.