Quality Factor
Energy dissipation in a vibrating system is quantified by the ratio of stored energy to the energy lost per cycle of oscillation. The resonant quality factor indicates the sharpness of the resonance peak and the damping level of a mechanical or electrical resonator.
Damping Influence
Fluid friction and internal material losses are the primary factors that lower the performance of a vibrating sensor. For a micro-machined resonator, the resonant quality factor is often limited by air damping, which necessitates operation in a vacuum to achieve high precision. Higher factors improve the resolution of mass and force sensors by narrowing the bandwidth of the resonance peak.
Vacuum packaging processes are characterized by measuring how the factor changes as a function of internal pressure. Sharp peaks improve resolution.
Measurement Precision
Frequency stability in timing applications relies on maintaining a consistent energy balance in the oscillator circuit. A high resonant quality factor reduces the phase noise and the susceptibility of the sensor to external vibration. This parameter is verified using a network analyzer to sweep the frequency and measure the width of the peak at the half-power points.
Qualification Boundary
Thermal noise and temperature-dependent elastic shifts cause the peak frequency to move during operation. If the resonant quality factor drops too low, the system can no longer lock onto the resonant frequency with sufficient accuracy. Designers must balance the material choice and the packaging environment to maintain the required factor for the intended application.