Demodulation Technique
Phase-sensitive signal processing architectures decompose modulated sinusoidal sensor waveforms into two orthogonal, time-invariant direct-current components. Operating through synchronous demodulation, quadrature detection multiplies an incoming sensor signal by both an in-phase reference carrier and a ninety-degree phase-shifted carrier. Subsequent low-pass filtering removes high-frequency sum products, producing independent real and imaginary baseband signals representing magnitude and phase.
The method operates across lock-in amplifiers, resolver-to-digital converters, eddy current instruments, and coherent optical detection systems. Processing limits are established by reference clock phase noise, which degrades phase resolution when tracking small dynamic signal modulations.
Harmonic Extraction
Synchronous multiplication isolates the fundamental excitation frequency, rejecting incoherent noise and out-of-band interference with exceptional selectivity. Through quadrature detection, the in-phase channel measures resistive load changes while the quadrature channel isolates reactive energy storage variations in inductive or capacitive transducers. Vector reconstruction calculates instantaneous signal amplitude via the square root of the sum of squared channels, while phase angles derive from four-quadrant arctangent operations.
Analog implementations suffer from phase drift and DC offset drift within analog multipliers, whereas digital implementations process numerical bitstreams with absolute mathematical repeatability.
Resolver Processing
Rotary electromagnetic resolvers utilize synchronous baseband demodulation to decode mechanical rotor positions within harsh motion-control environments. Excitation carrier frequencies supplied to rotor windings induce amplitude-modulated sine and cosine voltages across stationary stator windings. Processing these dual stator signals extracts high-resolution angular position independent of carrier amplitude fluctuations or thermal cable resistance shifts.
Phase delays introduced by long wiring harnesses must be compensated during signal conditioning, preventing phase tracking errors in position estimation loops.
Instrument Qualification
Metrological verification of phase-sensitive demodulators requires precision dual-channel waveform generators delivering phase-locked sine references with certified orthogonality. Channels under test must demonstrate gain matching within zero point zero five percent and phase orthogonality errors below zero point one degrees across the rated bandwidth. Calibration protocols measure DC offset leakage, channel-to-channel crosstalk, and harmonic rejection ratios under maximum dynamic range configurations.
Testing reports document baseband filter roll-off characteristics and the temporal settling response following large amplitude steps. Mismatched low-pass filters downstream of multiplication stages distort transient phase angle tracking, compromising dynamic response in automated feedback systems.