Thermal Conditioning
Thermal stabilization cycles conducted after the final encapsulation of electronic components stabilize the assembly by removing volatile substances and moisture. Performing a post-assembly bake-out ensures that the internal stresses within the mold compound are relaxed and that any trapped moisture is eliminated before the device enters service. This step is essential for precision sensors that are sensitive to the mechanical state of their housing.
Process Mechanism
Elevated temperatures facilitate the diffusion of water molecules out of the polymer matrix of the package. During a post-assembly bake-out, the devices are held at temperatures typically between 100 and 150 degrees Celsius for several hours.
Output Stability
Eliminating moisture and relaxing mechanical strain reduces the initial drift observed during the first few days of operation. A post-assembly bake-out provides a more consistent baseline for the final calibration of the instrument. Without this step, the sensor might exhibit a slow, predictable shift as it naturally loses moisture in a dry operating environment.
Systematic application of this process improves the yield of high precision devices by narrowing the distribution of the initial offset.
Thermal Hazard
Selection of the bake duration must balance the need for stability against the risk of damaging the component through overexposure. Excessive heat or prolonged exposure can lead to the degradation of the plastic package or the oxidation of external leads.