Spectral Noise
Spectral energy appearing in the frequencies immediately surrounding a carrier signal results from short term instabilities in the timing source. These phase noise sidebands limit the ability of a receiver to resolve weak signals that are close to a strong interference source. The intensity of these sidebands is typically measured in decibels relative to the carrier at a specific offset frequency.
Oscillator Stability
Short term frequency stability determines the width and height of the noise skirt around the central signal. When the internal components of a clock circuit vary due to thermal noise or power supply ripples, phase noise sidebands grow in magnitude. High quality crystal oscillators or atomic standards are used to keep these disturbances to a minimum in critical communications links.
Detection Limit
Reciprocal mixing occurs when the noise from a local oscillator combines with a strong nearby signal, masking the intended weak signal. If the phase noise sidebands are too high, the receiver floor rises and the dynamic range of the system is reduced. This effect is a primary consideration when designing radar and satellite ground stations.
Offset Measurement
Evaluation of noise power is conducted at logarithmic intervals from the center frequency to characterize the spectral density.