Temperature Stabilization
Active thermal regulation of a microelectromechanical timing element maintains a constant internal temperature regardless of external fluctuations. An ovenized MEMS resonator incorporates a co-located heater and temperature sensor directly on the silicon die. By continuously heating the resonator to a specific turnover temperature where the frequency-temperature slope is zero, the device achieves high frequency stability.
This approach eliminates the frequency drift that typically occurs in unregulated environments. The entire assembly sits in a vacuum package to minimize heat loss.
Thermal Control
Feedback loops adjust the heating power in response to real-time temperature measurements. This control circuit keeps the ovenized MEMS resonator at its target temperature with millikelvin precision. The heater must respond rapidly to external temperature changes to prevent transient frequency deviations.
This requires a close physical proximity between the heating element and the resonator.
Frequency Stability
Minimizing the temperature coefficient of frequency ensures high-precision timing over extended periods. With the heater active, the ovenized MEMS resonator exhibits stability comparable to traditional quartz crystal oscillators. This performance is critical for communication networks and navigation systems that require precise synchronization.
The frequency remains locked to within a few parts per billion.
System Performance
Power consumption and warm-up time are the primary trade-offs in heated timing devices. Because the ovenized MEMS resonator relies on active heating, it consumes more power than an uncompensated device. Modern designs use thermal isolation to keep the power consumption below tens of milliwatts.
This allows the high-precision clock to be used in portable systems.