Sensor Error
Vacuum degradation in hermetically sealed sensor cavities results from the release of trapped gases from internal surfaces or materials. Outgassing pressure drift causes a gradual change in the reference pressure which affects the accuracy of absolute pressure sensors or the damping of micro-mirrors. This phenomenon persists over the life of the device as molecules migrate from the bulk material into the cavity.
Material Source
Polymers, adhesives, resins and even certain metals contain volatile species that escape under low-pressure conditions. The rate of outgassing pressure drift depends on the temperature of the sensor and the chemical composition of the internal components. High-temperature baking during the manufacturing process reduces the initial load of these volatile contaminants.
Impact Mechanism
Changes in the internal cavity pressure alter the mechanical response of a diaphragm or a resonating structure. In a capacitive pressure sensor, outgassing pressure drift manifests as a shift in the zero-point offset that cannot be corrected by simple recalibration if the rate is non-linear. The drift continues until the internal pressure reaches equilibrium with the surrounding material.
Verification Method
Long-term stability tests in controlled environments monitor the output of the sensor over thousands of hours to characterize the drift profile. Outgassing pressure drift is quantified by comparing the sensor reading against a stable laboratory reference.