Signal Quality
Signal modulation metrics define the power difference between the highest and lowest states of a transmitted light pulse. The optical extinction ratio measures the efficiency of a laser or modulator in suppressing light during the off phase. This value determines the maximum distance and speed at which a receiver can distinguish between logical zeros and ones.
Receiver Performance
Receiver errors occur in digital systems when the background light level in the zero state is too high to be ignored. A high optical extinction ratio ensures that the decision threshold of the receiver can be set reliably. When this ratio is low, the signal to noise ratio decreases and the bit error rate typically rises.
Power Penalty
Power penalties occur when inadequate suppression of the off state forces the system to consume more energy to maintain the same data quality. Designers calculate the penalty of a low optical extinction ratio to determine the necessary boost in transmitter power. This calculation considers the thermal noise of the photodiode and the sensitivity of the transimpedance amplifier.
Modern fiber optic networks often require ratios exceeding ten decibels to support long haul transmission. Achieving this requires precise control over the biasing current and the modulation voltage applied to the semiconductor junction. It defines link capability.
Calibration Standard
Calibration of the test equipment involves a high dynamic range power meter or a digital communications analyzer. The optical extinction ratio is often expressed in decibels to simplify the comparison of different laser modules. Variations in temperature or aging of the diode can cause this ratio to drift over time.