Elastic Deformation
Mechanical system behavior where response parameters do not scale proportionally with applied excitation forces characterizes complex sensor structures. Systems operating within non-linear mechanics display displacement-dependent spring rates, non-linear damping, and multi-harmonic output signals under sinusoidal drive conditions. Micro-machined sensors exhibit these non-proportional responses when deflections approach structural thickness dimensions.
Precise modeling requires non-linear differential equations rather than linear superposition principles.
Dynamic Response
Large structural displacements induce geometry-dependent stiffening, causing resonance frequencies to shift with oscillation amplitude. Material yields or strain hardening alter internal stress distributions, generating higher-order harmonic resonances. Non-linear damping mechanisms, such as squeeze-film gas damping or thermoelastic dissipation, vary with velocity and displacement amplitudes.
Dynamic coupling between orthogonal vibration modes transfers energy across non-adjacent frequency bands.
Performance Distortion
Non-linear structural behavior distorts transducer output signals, introducing intermodulation products and dynamic range compression. Harmonic generation creates false spectral components that mimic genuine physical measurands. Hysteresis loops in stress-strain relationships cause output lag and zero-point offsets during cyclic load variations.
Jump phenomena and bi-stable states disrupt continuous measurement tracking, causing severe calibration errors.
Characterization Protocol
Experimental testing applies stepped-amplitude dynamic forces to capture force-deflection curves and amplitude-dependent frequency response profiles. Laser Doppler vibrometry maps structural deformation modes under high-drive conditions to identify local non-linear flexure zones. Finite element models incorporate geometric non-linearity and non-linear material properties to predict dynamic behavior across full operational envelopes.
Test reports define linear operating boundaries and specify harmonic distortion thresholds to guide system integration.